Single-Phase Series DC Motor

Single-Phase Series DC Motor

Merchandise Description:
 
DC motor is a rotating motor that can convert DC electric energy into mechanical energy (DC motor) or mechanical energy into DC electrical power (DC generator). It is a motor that can transform DC and mechanical strength into 1 another. When it operates as a motor, it is a direct recent motor, which converts electrical vitality into mechanical strength when it runs as a generator, it is a immediate current generator, which converts mechanical strength into electrical power.
 

Product Identify Solitary-stage collection dc motor
Motor Sort DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT machinery)
Composition composition The construction of DC motor must consist of two components: stator and rotor. The static portion of DC motor is known as stator. The main perform of stator is to generate magnetic area, which is composed of base, main magnetic pole, commutation pole, finish cap, bearing and brush gadget. Running part is known as rotor, whose major purpose is to create electromagnetic torque and inductive electromotive drive. It is the hub of strength conversion of DC motor. So it is also generally known as armature, which is composed of rotor, armature main, armature winding, commutator and fan.
Product ZSN,ZTP,Z4,Z2
Operating velocity  Constant Speed /Reduced Speed /Adjust Pace /Higher Speed Other 
Principal classification DC Motor is a machine that converts mechanical vitality into DC power. It is mostly used as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation electricity source of alternator. Despite the fact that in locations in which DC electricity is needed, AC power rectifier is also utilised to change AC into DC power, but from some aspects of performance, AC rectifier power offer can not fully change DC generator.  
Security quality IP55
Thermal Class one hundred fifty five (F)
Software DC motors are widely utilized in tape recorders, video recorders, video clip discs, electrical shavers, hair dryers, electronic watches, toys and so on.
Upkeep method Expert motor maintenance middle motor maintenance procedure: cleaning stator and rotor – replacing carbon brush or other parts – vacuum F force dipping paint – drying – Calibration equilibrium.
one. Use environment must be constantly dry, motor area need to be stored cleanse, air ingestion should not be hindered by dust, fibers and other road blocks.
two. When the thermal security of the motor proceeds to operate, it should be ascertained no matter whether the fault will come from the motor or the overload or the placing benefit of the protective unit is too minimal. After removing the fault, it can be put into operation.
3, ensure that the motor is effectively lubricated during procedure. The standard motor runs for about 5000 hrs, that is to say, lubricating grease must be additional or changed. When bearing overheating or lubricating deterioration is located in operation, the hydraulic pressure ought to modify lubricating grease in time. When replacing grease, the previous grease need to be removed, and the oil groove of bearing and bearing protect ought to be washed with gasoline. Then ZL-3 lithium grease need to be filled with 1/two (2 poles) and 2/three (four poles, 6 poles and eight poles) of the cavity among the interior and outer rings of the bearing.
4. When the daily life of the bearing is in excess of, the vibration and sounds of the motor will increase obviously. When the radial clearance of the bearing reaches the adhering to value, the bearing need to be replaced.
five, when eliminating the motor, it is Ok to eliminate the rotor from the shaft extension or the non extension conclude. If it is not essential to unload the admirer, it is a lot more convenient to get out the rotor from the non-axle extension conclude. When pulling out the rotor from the stator, the stator winding or insulation should be prevented from being damaged.
6. When replacing the windings, the form, measurement, turns and gauges of the first windings must be recorded. When these knowledge are lost, they should be attained from the manufacturer and the unique created windings should be transformed at will, which often deteriorates a single or several overall performance of the motor or even can make it impossible to use them.

 

 

Single-Phase Series DC Motor