Tailings Cyanide Leaching Agitation Tank for Gold Recovery

Tailings Cyanide Leaching Agitation Tank for Gold Recovery

Tailings Cyanide Leaching Agitation Tank for Gold  CZPTvery
Doing work Principle
The device is largely composed of a circular tank and an agitator. The generate program consisting of motor, reducer and assistance base drives the agitator to rotate. The agitator has the decrease and higher impellers, every with 4 blades. The blade’s rotation produces powerful thrust which forces the pulp to circulation from up to down at the heart of the tank. The pulp diffuses along the radial path at the base of the tank then flows upward together the round wall of the tank, hence a shut cycle is shaped. If the device is used as a leaching tank, the leaching agent solution and air are crammed into the tank, and the leaching agent and air are evenly distributed in the tank to leach gold. If the machine is used as the adsorption tank, activated carbon or other supplies with powerful adsorption capacity is put into the tank to adsorb gold dissolved in the remedy.
Normally at least 6 tanks work with each other continuously to complete the total circuit to get better gold as considerably as possible.

Attributes
Pulp shifting smoothly and uniform mixing which causes much less electricity intake.
Air is inflated into the heart of the tank and agitated by the blades of the agitator to evenly disperse in the tank which maximizes the utilization of oxygen.
The special agitator framework can make the solid articles of the pulp uniform in all positions of the tank to stay away from the particles settling.
CZPTy blade of the agitator is lined with wear-resistant rubber. Reduced rotating pace of the agitator lead to extended services life and efficiently defend activated carbon, so that the lowest use of activated carbon avoids gold reduction induced by that the gold loaded carbon is damaged and enters tailings.
The Multi-point air inflation method enhances the utilization rate of oxygen and can make oxygen, reagents & minerals to speak to each other fully which enhances the leaching efficiency and shortens the leaching residence time.
The air inflation technique and distinctive higher-strain water units share a pipeline method. If the tank loaded with slurry is stopped for a long time, the particles will settle in a natural way and pile with each other on the base of the tank. The lower impeller is blocked fully due to the fact the peak of the particles pile will exceed the top of the lower impeller. The particles close to the impeller can be unfastened by high-force water which can make it straightforward to begin the agitator once again.

Application Scope
This agitation tank series is utilized for the agitation, leaching and carbon adsorption in the gold cyanide plant with the particle dimensions of -200 meshes more than ninety% and the concentration of less than 45%. It can also be used for mixing, agitation and leaching operation in industries this sort of as metallurgy, chemical industry and mild business beneath corresponding situations.

CZPT Parameters
Little Dimensions

Product Tank Spec. Diameter × Height
(mm).
Powerful Volume
(m3)
Impeller Rotation Velocity
(r.p.m)
Impeller Diameter
(mm)
Energy
(kW)
LT2.0×2.5 2000×2500 six fifty two 909 2.two
LT2.5×3.fifteen 2500×3150 13.14 935
LT3.0×3.15 3000×3150 18.ninety three forty three 1130 four
LT3.0×3.five 3000×3500 21
LT3.15×3.55 3150×3550 24 1260
LT3.5×3.5 3500×3500 30 fifty two 1310 5.five
LT3.55×4. 3550×4000 33.six 43

Medium Dimensions

Product Tank Spec. Diameter × Height
(mm).
Effective Volume
(m3)
Impeller Rotation Velocity
(r.p.m)
Impeller Diameter
(mm)
Energy
(kW)
LT4.0×4.five 4000×4500 forty eight 35 1750 seven.5
LT4.5×5. 4500×5000 seventy one.57 1750
LT5.0×5.6 5000×5600 ninety eight 31 2046 11
LT5.5×6. 5500×6000 112 2100
LT6.5×7. 6500×7000 195 21 2400 22
LT7.0×7.five 7000×7500 245.4 21 2400 22
LT7.5×8. 7500×8000 268.6 23 2900 22
LT8.0×8.5 8000×8500 342 18.five 3300 30

Big Size

Model Tank Spec. Diameter × Peak
(mm).
Effective Volume
(mthree)
Impeller Rotation Velocity
(r.p.m)
Impeller Diameter
(mm)
Electricity
(kW)
LT8.5×9. 8500×9000 435 eighteen.5 3436 thirty
LT9.0×9.5 9000×9500 515 fourteen.8 3900 37
LT9.5×10 9500×10000 638 14.8 4000 forty five
LT10×10.5 10000×10500 705 fourteen.8 4000 forty five
LT10.5×11 10500×11000 815 13.2 4400 55
LT11×12 11000×12000 983 thirteen.2 4400 fifty five
LT12×13 12000×13000 1320 12 4800 75


1. What is the main organization scope of your firm?
HZE is a organization with R&D middle, design and style institute, production factories, installation and commissioning teams. Our buyers are in the mining and mineral processing fields. Our main organizations include mineral processing EPC (engineering, procurement and construction), task consultation, engineering design and style, mineral processing gear manufacturing, on-site installation, commissioning, staff instruction, consumer project procedure administration, spare parts offer and complex assistance. CZPTers are free to select any one particular or any combination of our services.

2. What are the exceptional advantages of your company?
The one particular-end support of mineral processing engineering venture and products is our main competitiveness.
The most crucial function that HZE distinguishes itself from other engineering firms, style businesses or consulting businesses is that we are also an tools maker with a generation plant of fifty,000 sq. meters, and we have comprehensive producing rout and the relevant gear.
HZE distinguishes alone from other tools companies by owning its personal R&D middle and engineering design institute.
HZE distinguishes alone from numerous mining equipment enterprises by possessing an skilled group with customers such as not only senior engineers of the company, but also best Chinese complex experts, college professors and researchers.

three. What are the traits of your firm’s 3D design?
HZE not only uses 3D application to design equipment, but also employs 3D software to design and style process movement, pipeline, metal construction, auxiliary amenities, and many others. of the entire mineral processing project. We even use 3D style for tools packaging, container packing and tools instructions guide. This significantly enhances the good quality of equipment and engineering, shortens the construction period, facilitates technical discussion and analysis, facilitates undertaking management, improves construction safety and reduces undertaking cost.

4.  What are the provider functions of your firm?

  1. CZPTers who whether or not acquire our tools, or entrust us with EPC, or demand us to provide a certain services, cooperate carefully with us to carry out certain operations and supervise our implementation all through the approach.
  2. HZE will try out to realize the standard situation and demands of consumers as comprehensive as possible just before the sale, formulate a preliminary prepare according to the particular circumstance of customers, and get unanimous views soon after communications and discussions with consumers to determine the prepare.
  3. We set up customer documents for each client who signed the contract with us and upload them to the Cloud in which customers can also get an account and password. CZPTers can have all the files, films and photographs, technologies, services, execution, procedure, administration and handle, routine maintenance and so on relevant to the enterprise.
  4. Whether it is in the method of basic contracting, equipment manufacturing or providing some type of support, we welcome customers to know about our implementation on the spot or by means of the network, and place CZPT needs and views.
  5. We support customers who have employed our products to formulate procedure requirements and make suggestions on maintenance programs and spare elements inventories. In addition to schedule on-site installation, commissioning and education, for the duration of the creation interval following we handing in excess of tools to buyers for use, we usually recognize the equipment utilizing scenarios via the network and supply direction and coaching to buyer management and operators.
  6. For the clients who have just start off the mining company, we give the opportunity of education and apply in China’s mines for the clients’ personnel, until finally they are skilled in operation and maintenance.

 

Tailings Cyanide Leaching Agitation Tank for Gold Recovery